Award winning innovative design incorporates the bilge pump and float switch in a single housing.
Unique Rule "Spongeability" feature leaves the bilge the driest ever - When the float switch drops and the pump senses no load against the impeller, the shut off phase begins.
At that point the pump will run an additional 15 seconds allowing the pump to take the bilge water level down by an additional 10mm, reducing boat weight, saving fuel and minimizing bilge odour. 12v and 24v available.
3 year limited warranty.
Fully automatic submersible bilge pump systems
Non-mercury float switch and pump in a common housing
No cycling - 2 second delayed action - eliminating any false starts
No battery drain other than when pump is in use
Removable strainer and impeller area are accessable to clear debris
Additional coarse screen stainless steel strainer included
Pump and switch are internally wired for easy installation
A 3rd wire allows for manual over-ride using Rule switch panel (not included) or it can activate an alarm or indicator lamp
.jpg)
Email this info to a Friend
Encripted Payment Security